QTY |
FOB PRICE |
CIF PRICE
QUANTITY
-
+
ton
TOTAL COST
$1660Material : Default |
Pcs/Carton : N/A | Packing Size/Carton : N/A | Packing Vol/Carton : N/A |
N.W./Carton : N/A | G.W./Carton : N/A | QTY in 40HQ : N/A |
QTY in 40GP : N/A | QTY in 20GP : N/A |
TPV 2170 is made in using the dynamic vulcanization high-tech high-performance EPDM/PP thermoplastic elastomer.It has good environmental resistance,low compression deformation performance;It can use the way such as extrusion,injection molding,blow molding processing molding,do not need to conventional vulcanization process of rubber processing;It is easy dyeing,make product design more flexible;It can be recycling reuse,more in line with environment protection requirements.
The typical performance in the following table:
Physical Properties |
Test Standard |
Typical Value |
Unit |
|
Hardness |
GB/T531 |
ISO 7619 |
75 |
Shore A |
Density |
GB/T533 |
ISO 2781 |
0.99 |
g/cm3 |
Tensile Strength |
GB/T528 |
ISO 37 |
6.1 |
MPa |
Elongation at Break |
GB/T528 |
ISO 37 |
450 |
% |
Tear Strength |
GB/T529 |
ISO 34 |
29 |
kN/m |
Melting Index |
GB/T3682 |
ISO 1133 |
7 |
g/10min |
Attention:Did not indicate the test temperature above is 23℃
The typical molding process in the following table:
Injection Molding Conditions |
Extrusion Molding Conditions |
||||
Temperature Setting |
Front end Mesomere Posterior Jet |
180-215℃ 180-215℃ 180-215℃ 187-220℃ |
Temperature Setting |
Front end Fillter Section Measuring Section Posterior |
180-200℃ 180-205℃ 187-210℃ 187-210℃ |
Shrinking Percentage |
1.6%~2.1% |
Expansion Rate |
0%-15% |
||
Attention:Molding material should be dry(80℃×2Hour)
• Amanbo Return Policy applies to all orders on amanbo.com.
• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.
• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.